top of page


Multiple Patterns

• 3/4HP, 208-240Vac operating voltage range, single phase

• 1750 RPM • Oil cooled • Continuous duty rated

• 17mm top and bottom bearings • Thermal overload protection

• Fully unitized heavy-duty carbon-ceramic mechanical seal

• Series 300 stainless steel can • Engineering grade thermoplastic top

• Sacrificial anode installed on 316 stainless shaft POWER CABLE

• 3 wire (L1, L2, G) • Quick Disconnect standard on 12+ AWG cords (otherwise optional)

• Stainless steel strain relief on 12+ AWG cords • 6’ flex sleeving protection standard (optional for entire cord length)



• Custom thermoplastic impeller • UV-resistant thermoplastic cone and fountain housing • Series 300 stainless steel hardware

• Four thermoplastic nozzles (five patterns)

• Thermoplastic baseplate and housing

• Twist on/off nozzles for easy pattern changes CONTROL PANEL • UL 508 Listed

• NEMA type 3R/4X thermoplastic enclosure

• 20 amp breaker • Human-rated GFCI protection

• Surge protector • 24-hour mechanical fountain timer • Terminal block wiring • 24-hour mechanical timer for optional lighting

• 4 wire power required (L1, L2, N, G) OVERVIEW • Complete package includes motor unit, control panel, float with screens, mooring lines, cable, four interchangeable nozzles. • Cable is UL, CSA & NEC rated for underwater use.

• Total package Listed by ETL to UL/CSA standards.

• Intake near surface allows for shallow operation

• Saltwater compatible • Packaged for convenient shipping

• Optional lighting available FLOAT • UV-resistant polyethylene

• Single-piece float • Protective coated 300 series stainless steel hardware

• Thermoplastic protective bottom screen • Two 50’ braided nylon mooring ropes Dimensions Float width w/ brackets: 28” Unit height with float: 17

3400HJF 3/4HP Kasco Decorative Fountain

    bottom of page